跳到主要内容

JBGenericBuybackDelegate

Git Source

Mainnet: 0x6B700b54BBf7A93f453fFBF58Df0fE1ab2AADA08

Goerli: 0x31682096474BFD6704992b7C5f993639E372900e

Inherits: ERC165, JBOperatable, IJBGenericBuybackDelegate

Datasource and delegate allowing pay beneficiary to get the highest amount of project tokens between minting using the project weigh and swapping in a given Uniswap V3 pool.

This supports any terminal and token, as well as any number of projects using it.

State Variables

SLIPPAGE_DENOMINATOR

The unit of the max slippage (expressed in 1/10000th)

uint256 public constant SLIPPAGE_DENOMINATOR = 10000;

MIN_TWAP_DELTA

The minimum twap deviation allowed (0.1%, in 1/10000th)

This is to avoid bypassing the swap when a quote is not provided (ie in fees/automated pay)

uint256 public constant MIN_TWAP_DELTA = 100;

MAX_TWAP_DELTA

The minimmaximum twap deviation allowed (9%, in 1/10000th)

This is to avoid bypassing the swap when a quote is not provided (ie in fees/automated pay)

uint256 public constant MAX_TWAP_DELTA = 9000;

MIN_SECONDS_AGO

The smallest TWAP period allowed, in seconds.

This is to avoid having a too short twap, prone to pool manipulation

uint256 public constant MIN_SECONDS_AGO = 2 minutes;

MAX_SECONDS_AGO

The biggest TWAP period allowed, in seconds.

This is to avoid having a too long twap, bypassing the swap

uint256 public constant MAX_SECONDS_AGO = 2 days;

UNISWAP_V3_FACTORY

The uniswap v3 factory

address public immutable UNISWAP_V3_FACTORY;

DIRECTORY

The JB Directory

IJBDirectory public immutable DIRECTORY;

CONTROLLER

The project controller

IJBController3_1 public immutable CONTROLLER;

PROJECTS

The project registry

IJBProjects public immutable PROJECTS;

WETH

The WETH contract

IWETH9 public immutable WETH;

delegateId

The 4bytes ID of this delegate, used for metadata parsing

bytes4 public immutable delegateId;

poolOf

The uniswap pool corresponding to the project token-terminal token market (this should be carefully chosen liquidity wise)

mapping(uint256 _projectId => mapping(address _terminalToken => IUniswapV3Pool _pool)) public poolOf;

projectTokenOf

The project token

mapping(uint256 _projectId => address projectTokenOf) public projectTokenOf;

sweepBalanceOf

Any ETH left-over in this contract (from swap in the end of liquidity range)

mapping(address _beneficiary => mapping(address _token => uint256 _balance)) public sweepBalanceOf;

totalSweepBalance

Running cumulative sum of token left-over

mapping(address _token => uint256 _contractBalance) public totalSweepBalance;

twapParamsOf

The twap max deviation acepted (in 10_000th) and timeframe to use for the pool twap (from secondAgo to now)

Params are uint128 and uint32 packed in a uint256, with the max deviation in the 128 most significant bits

mapping(uint256 _projectId => uint256 _params) internal twapParamsOf;

Functions

constructor

No other logic besides initializing the immutables

constructor(IWETH9 _weth, address _factory, IJBDirectory _directory, IJBController3_1 _controller, bytes4 _delegateId)
JBOperatable(IJBOperatable(address(_controller)).operatorStore());

payParams

The datasource implementation

function payParams(JBPayParamsData calldata _data)
external
view
override
returns (uint256 weight, string memory memo, JBPayDelegateAllocation3_1_1[] memory delegateAllocations);

Parameters

NameTypeDescription
_dataJBPayParamsDatathe data passed to the data source in terminal.pay(..). _data.metadata need to have the Uniswap quote this quote should be set as 0 if the user wants to use the vanilla minting path

Returns

NameTypeDescription
weightuint256the weight to use (the one passed if not max reserved rate, 0 if swapping or the one corresponding to the reserved token to mint if minting)
memostringthe original memo passed
delegateAllocationsJBPayDelegateAllocation3_1_1[]The amount to send to delegates instead of adding to the local balance.

secondsAgoOf

The timeframe to use for the pool twap (from secondAgo to now)

function secondsAgoOf(uint256 _projectId) external view returns (uint32);

Parameters

NameTypeDescription
_projectIduint256the project id

Returns

NameTypeDescription
<none>uint32_secondsAgo the period over which the twap is computed

twapDeltaOf

The twap max deviation acepted (in 10_000th)

function twapDeltaOf(uint256 _projectId) external view returns (uint256);

Parameters

NameTypeDescription
_projectIduint256the project id

Returns

NameTypeDescription
<none>uint256_delta the maximum deviation allowed between amount received and twap

didPay

Delegate to either swap to the beneficiary or mint to the beneficiary

This delegate is called only if the quote for the swap is bigger than the lowest received when minting. If the swap reverts (slippage, liquidity, etc), the delegate will then mint the same amount of token as if the delegate was not used. If the beneficiary requests non claimed token, the swap is not used (as it is, per definition, claimed token)

function didPay(JBDidPayData3_1_1 calldata _data) external payable override;

Parameters

NameTypeDescription
_dataJBDidPayData3_1_1the delegate data passed by the terminal

uniswapV3SwapCallback

The Uniswap V3 pool callback (where token transfer should happens)

Slippage controle is achieved here

function uniswapV3SwapCallback(int256 amount0Delta, int256 amount1Delta, bytes calldata data) external override;

redeemParams

Generic redeem params, for interface completion

This is a passthrough of the redemption parameters

function redeemParams(JBRedeemParamsData calldata _data)
external
pure
override
returns (
uint256 reclaimAmount,
string memory memo,
JBRedemptionDelegateAllocation3_1_1[] memory delegateAllocations
);

Parameters

NameTypeDescription
_dataJBRedeemParamsDatathe redeem data passed by the terminal

setPoolFor

Add a pool for a given project. This pools the become the default one for a given token project-terminal token

Uses create2 for callback auth and allows adding a pool not deployed yet. This can be called by the project owner or an address having the SET_POOL permission in JBOperatorStore

function setPoolFor(uint256 _projectId, uint24 _fee, uint32 _secondsAgo, uint256 _twapDelta, address _terminalToken)
external
requirePermission(PROJECTS.ownerOf(_projectId), _projectId, JBBuybackDelegateOperations.CHANGE_POOL)
returns (IUniswapV3Pool _newPool);

Parameters

NameTypeDescription
_projectIduint256the project id
_feeuint24the fee of the pool
_secondsAgouint32the period over which the twap is computed
_twapDeltauint256the maximum deviation allowed between amount received and twap
_terminalTokenaddressthe terminal token

changeSecondsAgo

Increase the period over which the twap is computed

This can be called by the project owner or an address having the SET_TWAP_PERIOD permission in JBOperatorStore

function changeSecondsAgo(uint256 _projectId, uint32 _newSecondsAgo)
external
requirePermission(PROJECTS.ownerOf(_projectId), _projectId, JBBuybackDelegateOperations.SET_POOL_PARAMS);

Parameters

NameTypeDescription
_projectIduint256
_newSecondsAgouint32the new period

setTwapDelta

Set the maximum deviation allowed between amount received and twap

This can be called by the project owner or an address having the SET_POOL permission in JBOperatorStore

function setTwapDelta(uint256 _projectId, uint256 _newDelta)
external
requirePermission(PROJECTS.ownerOf(_projectId), _projectId, JBBuybackDelegateOperations.SET_POOL_PARAMS);

Parameters

NameTypeDescription
_projectIduint256
_newDeltauint256the new delta, in 10_000th

sweep

Sweep the token left-over in this contract

function sweep(address _beneficiary, address _token) external;

_getQuote

Get a quote based on twap over a secondsAgo period, taking into account a twapDelta max deviation

function _getQuote(uint256 _projectId, IJBPaymentTerminal _terminal, address _projectToken, uint256 _amountIn)
internal
view
returns (uint256 _amountOut);

Parameters

NameTypeDescription
_projectIduint256
_terminalIJBPaymentTerminal
_projectTokenaddress
_amountInuint256the amount to swap

Returns

NameTypeDescription
_amountOutuint256the minimum amount received according to the twap

_swap

Swap the terminal token to receive the project toke_beforeTransferTon

This delegate first receive the whole amount of project token, then send the non-reserved token to the beneficiary, then burn the rest of this delegate balance (ie the amount of reserved token), then mint the same amount as received (this will add the reserved token, following the fc rate) then burn the difference (ie this delegate balance) -> End result is having the correct balances (beneficiary and reserve), according to the reserve rate

function _swap(JBDidPayData3_1_1 calldata _data, uint256 _minimumReceivedFromSwap, IERC20 _projectToken)
internal
returns (uint256 _amountReceived);

Parameters

NameTypeDescription
_dataJBDidPayData3_1_1the didPayData passed by the terminal
_minimumReceivedFromSwapuint256the minimum amount received, to prevent slippage
_projectTokenIERC20

_mint

Mint the token out, sending back the token in the terminal

function _mint(JBDidPayData3_1_1 calldata _data, uint256 _amount) internal;

Parameters

NameTypeDescription
_dataJBDidPayData3_1_1the didPayData passed by the terminal
_amountuint256the amount of token out to mint

supportsInterface

function supportsInterface(bytes4 _interfaceId) public view override(ERC165, IERC165) returns (bool);